TKG80000 series (ball screw transmission) linear motion unitDetailed product description：

TKG80 series (ball screw transmission) linear motion unit

Ball screw pair transmission, precise positioning, good precision retention.
Rolling linear guide rail for fast and smooth operation.
Hard aluminum alloy profile base, lightweight and corrosion-resistant, economical and practical.
Metal cover protection, the loading platform can be configured according to usage requirements.
Servo (stepper) motor drive.

TKG80000 series (ball screw transmission) linear motion unit main performance, accuracy indicators, and main dimensions (unit: mm)

model specification	performance			Accuracy mm	Overall dimensions			Dimension of worktable	Remarks
	Effective travel mm	Load capacity kg	Speed mm/sec	Repetitive positioning accuracy	L	W	H	BXC
TKG80600	six hundred	Level 80 Vertical 20	six hundred	± 0.02	eight hundred and one	one hundred and forty	one hundred and eight	150X165	1. Lead S: 10, 16 20（mm） 2. Recommended low speed motor: Servo 200W, 400W Step 56, 86
TKG80700	seven hundred		four hundred and seventy		nine hundred and one
TKG80800	eight hundred		three hundred and seventy		one thousand and one
TKG80900	nine hundred		three hundred and five		one thousand one hundred and one
TKG801000	one thousand		two hundred and fifty		one thousand two hundred and one
TKG801100	one thousand and one hundred		two hundred and ten		one thousand three hundred and one
TKG801200	one thousand and two hundred		one hundred and eighty		one thousand four hundred and one

Installation method of linear unit
Screw type
There are symmetrical screw holes on the bottom surface of the machine base cavity, which can be directly operated by removing the protective cover during installation. (Recommended for use)

Pressure plate type
Utilize the grooves on both sides of the machine base profile section and secure it to the installation plane with specialized pressure blocks.

T-shaped groove type
Using the two T-shaped slots and T-shaped nuts at the bottom of the machine base profile section, tighten them onto the installation plane with bolts.