FBE series energy storage gas triggerDetailed product description：

Product Introduction
FBE energy storage impact gas trigger is an efficient mechanical manual tool for disassembling bolts and nuts, widely used in the petrochemical industry, power industry, transportation industry, shipbuilding industry, smelting industry, etc. This product can play a very prominent role in major maintenance in various industries. It can tighten or remove a bolt or nut in just a few seconds, greatly shortening the maintenance period of each industry. Moreover, it is very safe and easy to use. As the power source used for this product is compressed air, it is particularly suitable for use in some explosion-proof places. The specification for disassembling bolts and nuts of FBE type energy storage impact gas trigger is M18-M100.

Gas trigger parameters:

model	FBE20	FBE30	FBE42	FBE56	FBE72	FBE100
Tighten thread range	18-20	24-30	32-42	45-56	58-72	76-100
Load gas consumption L/SMAX	thirty	forty	fifty	sixty	seventy-five	ninety
Accumulated torque N.M	four hundred and ninety	one thousand six hundred and five	four thousand four hundred and ninety-two	nine thousand eight hundred and eighty	eighteen thousand and seventy-six	forty-three thousand five hundred and seventy-six
Transmission Sifang Series	20×20	25×25	30×30	30×30	45×45	63.5×63.5
Working pressure Mpa	zero point six three
Edge to center distance mm	thirty-two	thirty-nine	forty-eight	fifty-two	eighty	ninety-six
Machine weight KG	four point five	seven point four	eleven point five	fifteen point five	thirty-three	ninety-eight
Tightening time S	two	three	five	ten	twenty	thirty
Inner diameter of trachea mm	thirteen	thirteen	sixteen	sixteen	nineteen	nineteen

Note: 1. The acceptance air pressure is 0.63Mpa
2. The product weight does not include sleeves, intake joints, auxiliary handles, lifting rings, etc
3. The above tightening torque and tightening time are applicable to 45 carbon steel
4. The length of the trachea should be ≤ 10m

FBE series energy storage gas trigger special sleeve parameters

model	Content	common bolt
FBE20 wrench sleeve	bolt specification	M18	M20	M22
	Hexagonal edge size	twenty-seven	thirty	thirty-four
	Square Drive	twenty	twenty	twenty
FBE30 wrench sleeve	bolt specification	M20	M22	M24	M27	M30
	Hexagonal edge size	thirty	thirty-two	thirty-six	forty-one	forty-six
	Square Drive	twenty-five	twenty-five	twenty-five	twenty-five	twenty-five
FBE42 wrench sleeve	bolt specification	M30	M33	M36	M39	M42
	Hexagonal edge size	forty-six	fifty	fifty-five	sixty	sixty-five
	Square Drive	thirty	thirty	thirty	thirty	thirty
FBE56 wrench sleeve	bolt specification	M36	M42	M48	M52	M56
	Hexagonal edge size	fifty-five	sixty-five	seventy-five	eighty	eighty-five
	Square Drive	thirty	thirty	thirty	thirty	thirty
FBE72 wrench sleeve	bolt specification	M56	M64	M72
	Hexagonal edge size	eighty-five	ninety-five	one hundred and five
	Square Drive	forty-five	forty-five	forty-five
FBE100 wrench sleeve	bolt specification	M80	M90	M100
	Hexagonal edge size	one hundred and fifteen	one hundred and thirty	one hundred and forty-five
	Square Drive	sixty-three point five	sixty-three point five	sixty-three point five

Note: Users can customize various special specification sleeves FBE30 42 56 with auxiliary handles in bulk