TQ1 type linkage consoleDetailed product description：

Features:
The TQ1 linkage console is mainly used in the main circuits and control circuits with AC 50Hz and rated working voltage of 380V and below. It can also be used in control circuits with DC rated working voltage of 220V and below to control the starting, speed regulation, steering, and braking of heavy motors.

Specifications

Purpose:
Performance and Technical Data of TQ1 Linkage Console
1. The linkage console is suitable for the following working conditions:
A、 The ambient air temperature shall not exceed+40 ℃, with a minimum of -5 ℃, and the average temperature within 24 hours shall not exceed+35 ℃.
B、 Installation location, not exceeding an altitude of 2000 meters.
C、 The air is clean, and the relative humidity should not exceed 50% at a maximum height of+40 ℃. At lower temperatures, a higher relative humidity is allowed, but consideration should be given to the possibility of slight condensation due to temperature changes.
D、 The quality of the power supply network is qualified, and the fluctuation range of the incoming voltage does not exceed ± 10% of the rated voltage
E、 Vertical installation, with a tilt angle not exceeding 5 degrees, firmly installed without vertical jumping or horizontal movement relative to the driver's cab.
2. Product classification
a、 According to the combination form of the controller, there are three types: master command type, fully cam type, and hybrid type;
b、 Divided into 1, 2, 3, 4, 5, and 6 control rooms based on the number of controllers;
c、 Divided into single handle and dual handle according to the linkage working mode.
3. The agreed heating current for the contact of the linkage table is divided into 10A, 25A (32A), and 63A, with a basic continuity rate of 40%. The operating frequency of the master controller is 1200 times/hour, and the cam controller is 600 times/hour.