LD5100 High precision clamp leakage current sensorDetailed product description：

1、 Introduction
The LD5100 series high-precision clamp current sensor is widely used for high-precision, small phase error AC leakage current, current, power, and energy measurement in fields such as power, communication, meteorology, railways, oil fields, construction, metrology, scientific research and teaching units, industrial and mining enterprises, etc. It can be connected to various high-precision digital multimeters or data recorders and is very convenient to use.
The LDCR5100 series high-precision clamp leakage current sensor adopts the latest CT technology, which is almost unaffected by external magnetic fields, ensuring high-precision, high stability, and high reliability of continuous acquisition and measurement throughout the year.

2、 Characteristics
Exquisite appearance, compact body
Clamp design, no need to disconnect the tested circuit, non-contact measurement, safe and fast
It can output current or voltage signals (user selectable). Current signal uA/mA, mA/A; Voltage signal mV/mA, mV/A
Voltage signal: External power supply 5VDC, full range output voltage signal 0-3VAC or 0-3VDC
High precision: The accuracy of the output voltage signal 0-3VAC can reach 0.5% for the full range of 0.1mA to 300mA or 1mA to 3000mA.

3、 Application
Leakage current, high-order harmonic current, online AC current, electrical energy, power factor correction device
Small phase detection and analysis instrument
Industrial control device
data logger
Oscilloscope and harmonic analyzer

4、 LD5100 high-precision clamp leakage current sensor type spectrum

Model number	measurement range	resolution	accuracy	Jaw size	output signal
LD5100	10uA～300A	10uA	1%	φ40mm	current signal
LD5100A	1uA～80A	1uA	1%	φ40mm	current signal
LD5100B	5mA～600A	5mA	2%	φ40mm	current signal
LD5100C	10uA～300A	10uA	1%	φ40mm	voltage signal
LD5100D	1uA～80A	1uA	1%	φ40mm	voltage signal
LD5100E	5mA～600A	5mA	2%	φ40mm	voltage signal

5、 Specifications

Function	AC leakage current, high-order harmonic current, AC current, online AC current detection, phase, energy, power factor correction
Detection method	Clamp CT, current mutual inductance output
Instrument size	Width, height, and thickness: 64mm × 160mm × 23mm
Jaw size	φ40mm
Line length	1.5m
test scope	AC 1uA～80A ;10uA~300A; 5mA~600A (selection)
resolution	1uA;10uA; 5mA (selection)
Accuracy	1%; 2% (selection)
operating frequency	10Hz～100KHz
line voltage	AC600V and below line testing
Instrument quality	About 120g
Working temperature and humidity	-10℃～50℃； Below 80% RH
Storage temperature and humidity	-10℃～60℃； Below 70% RH
insulation strength	AC2kV/rms (between iron core and box)
Suitable for safety regulations	IEC1010-1、IEC1010-2-032、 Pollution level 2, CAT III (600V)