LMKK-Y Open close current transformerDetailed product description：

Product Description

One Overview
The LMKK-Y switchable current transformer product complies with IEC and GB1208-97 "Current Transformers"; Suitable for indoor devices with a rated voltage of 10kV and below. Used for circuit control, protection, etc.

II Structure Introduction
The LMKK-Y switchable current transformer adopts a high-strength PVC shell and a fully cast busbar structure. The transformer is directly clamped onto the cable with three rubber rings that press against the cable and integrate with it. The iron core of the transformer is made of high-quality silicon steel sheets, and the secondary wires are evenly wound on the iron core. The transformer has a switchable structure and can be installed without cutting the cable.

3、 Scope of application
The altitude of the installation site shall not exceed 3000m;
Environmental temperature: -25 to+40 ℃;
Cable outer diameter that can be worn once: φ 8- φ 240mm
Input: 0-60KA
Output: 0~500mA 1A or 5A 5VDC or 4~20MA (customer defined)
There is no pollution, corrosive or explosive medium in the atmosphere that seriously affects the insulation performance of transformers.

4、 Electrical parameters of LMKK-Y switchable current transformer:

model	input current	output current	accuracy class	capacity	overload capacity
LMKK8050A	50A	25mA (or 5A)	Level 0.2, 0.5, or 1.0	2.5VA or 5VA or 10VA	120%
LMKK8100A	100A	50mA (or 5A)
LMKK8150A	150A	75mA (1A or 5A)
LMKK8200A	200A	100mA (1A or 5A)
LMKK8500A	500A	100mA (1A or 5A)
LMKK81000A	1000A	0-5V (1A or 5A)
LMKK82000A	2000A	1A or 5A
LMKK83000A	3000A	1A or 5A
LMKK84000A	4000A	1A or 5A
LMKK85000A	5000A	1A or 5A
LMKK810000A	10000A	1A or 5A
LMKK820000A	20000A	1A or 5A

LMKK-Y switchable current transformer