SH/JW7200 Pocket explosion-proof dimming flashlightDetailed product description：

survey:
The JW7200 pocket explosion-proof dimming flashlight can provide safe and reliable mobile lighting for various flammable and explosive places, underwater and other work sites.

Performance:
Safe and Explosion proof: The highest explosion-proof level of the explosion-proof type, using magnetic triggering, can work safely in various flammable and explosive places.
Efficient and energy-saving: High energy memory free batteries have large capacity, long lifespan, low self discharge rate, and high luminous efficiency of special light bulbs.
Convenient and flexible: using pulse dimming technology, strong light and working light can be selected freely, with a continuous working time of 1.5 hours for strong light and 4 hours for working light.
Waterproof and durable: good sealing performance, can work normally under 200 meters of water; The imported high hardness alloy shell can withstand strong collisions and impacts.
Automatic protection: The intelligent charger is equipped with low voltage protection and charging display device.
Small size: The external dimensions are ø 40X208 millimeters.
Lightweight: only 280 grams.

Use of SH/JW7200 Pocket Explosion proof Dimmable Flashlight:
1. When in use, hold down the switch slider and push it forward or backward to select the strong light or working light working mode.
2. After being fully charged once, it can be used at any time within 6 months; If it is not used for a long time, it should be recharged for 5 hours every six months.
3. When the battery is about to run out during use, the brightness of the flashlight will sharply decrease. At this time, it should be stopped and charged in a safe place or replaced with a backup battery.
4. The charger is equipped with a built-in charging protection device. When the indicator light is red, it indicates normal charging, and when the indicator light turns green, it indicates that the battery is fully charged; The charging socket on the back cover of the flashlight is a small hole, just insert the output plug of the charger into the corresponding charging socket.
5. When replacing a light bulb, first use a special tool to unscrew the light ring on the head of the flashlight, remove the faulty bulb, and then insert the new bulb into the socket of the lamp holder (must be inserted to the bottom).
6. When replacing the battery, first use a special tool to unscrew the tail cover of the flashlight, remove the battery from the flashlight, and replace it with a new battery (note that the positive pole is facing forward).

Warning:
1. The replacement of light sources, charging, and dismantling of lighting fixtures must be carried out in a safe place.
2. Charging should be done promptly after each use.

Three notes:
1. When carrying or transporting, the switch slider must be placed in the closed position to ensure that the switch does not accidentally move during transportation.
2. Regularly check and ensure that the lamp tube is tightly connected to the front and rear covers to enhance waterproof, explosion-proof, and impact resistance capabilities.
3. When charging or discharging continuously with strong light for a long time in a place with high ambient temperature, there may be a slight temperature rise on the surface of the flashlight, which is a normal phenomenon.
4. It is strictly prohibited to place the transparent part of the lamp facing downwards after turning it on; Do not dismantle the structural components of the lighting fixture at will, especially the sealing structural components.
5. After use in corrosive environments or seawater, the surface should be wiped clean.