SH/RJW7100 Portable explosion-proof searchlightDetailed product description：

survey:
SH/RJW7100 portable explosion-proof searchlight can provide mobile lighting for various flammable and explosive places, underwater work, and other work sites.

Performance:
Safe and Explosion proof: The highest explosion-proof level of the explosion-proof type can work safely in various flammable and explosive places.
Efficient and energy-saving: Specially designed high color temperature light bulbs have a long lifespan, low energy consumption, and soft focusing (can be used for photography at traffic accidents and criminal investigation sites, as well as various trace and fingerprint photography); Strong light flux of 1200 lumens, range of up to 600 meters, and continuous working time of up to 1.5 hours; The working light flux is 600 lumens, and the continuous working time is not less than 3.5 hours. Reliable and durable: High energy memory free batteries have high capacity, no pollution, excellent charging and discharging performance, and low self discharge rate; The shell is made of imported high hardness alloy material, which has extremely high resistance to strong collisions and impacts.
Waterproof and pressure resistant: With deep diving ability, it can work normally for a long time under 200 meters of water.
Convenient and flexible: using pulse dimming technology, strong light and working light can be freely converted; It can be carried by hand or shoulder, with a beautiful appearance, small size, and light weight.
Automatic protection: equipped with low voltage protection and anti misoperation device, the switch can be locked when not in use, and the back cover automatically locks during normal use.

Use of SH/RJW7100 portable explosion-proof searchlight:
1. When using, first turn the switch lock on the back cover upwards, and then turn the switch dial to the left or right to select the strong light or working light mode; After use, the switch lock should be turned downwards to lock the switch to prevent accidental operation.
2. After the first few uses, the charging time is 10-12 hours. In the future, it can be recharged in a timely manner according to the normal charging time to ensure that the battery is always in a fully charged state; After being fully charged once, it can be used anytime within 45 days; If not used for a long time, it should be charged for 10 hours before use.
3. During use, if the battery is about to run out, the alarm circuit will cause the brightness of the light to suddenly dim and automatically cut off the power supply in about 10 minutes. At this time, it should be stopped and charged in a timely manner.
4. When charging, the input indicator light is on, and the charger has a built-in charging protection device. The two charging sockets on the back cover of the light do not distinguish between positive and negative poles. Simply plug the charger's output plug into the charging socket.
5. When replacing the light bulb, first turn the switch lock downwards, lock the switch dial wheel, then loosen the back cover and pull it out as a whole, remove the faulty light bulb, insert the new light bulb into the socket of the lamp (must be inserted to the bottom), and finally install and tighten the back cover.

Warning:
1. The replacement of light sources, charging, and dismantling of lighting fixtures must be carried out in a safe place.
2. Charging should be done promptly after each use.

Three notes:
1. When carrying or transporting, the switch must be locked to prevent accidental movement during transportation.
2. Regularly check and ensure that the handle is tightly connected to the back cover, and the lamp tube is tightly connected to the back cover to enhance waterproof, explosion-proof, and impact resistance capabilities.
3. When charging or discharging continuously with strong light for a long time in a place with high ambient temperature, there may be a slight temperature rise on the surface of the flashlight, which is a normal phenomenon.
4. It is strictly prohibited to place the transparent part of the lamp facing downwards after turning it on; Do not directly illuminate the eyes with light (as strong light may cause harm to the eyes).
5. Do not dismantle the structural components of the lighting fixture at will, especially the sealing structural components.
6. After use in corrosive environments or seawater, the surface should be wiped clean.

Technical parameters of SH/RJW7100 portable explosion-proof searchlight:
Rated voltage: DC12V
Rated power: 20W
Rated capacity: 2.7Ah
Continuous discharge time: 1.5h (strong light)/≥ 3.5h (working light)
Charging time: 8-10 hours
Battery lifespan: approximately 1000 cycles
Dimensions: φ 70 × 196mm
Weight: 1.1kg