SH/JW7300 Miniature Explosion proof FlashlightDetailed product description：

survey:
The OR-JW7300 miniature explosion-proof flashlight is suitable for mobile lighting and signal indication in police, military, industrial and mining enterprises, as well as various outdoor work sites.
Performance:
Explosion proof type has the highest explosion-proof level and can work safely in flammable and explosive places.
The light source adopts a specially designed ultra-high brightness white LED, with a visible distance of up to 5000 meters; It has the functions of lighting, flickering, and remote signal indication, with a continuous lighting time of not less than 10 hours.
High energy memoryless batteries have a large capacity, long lifespan, low self discharge rate, and are economical and environmentally friendly; LED light sources consume less energy and have a lifespan of up to 100000 hours; Imported high hardness alloy shell to ensure it can withstand strong impacts; The charging time only takes 4 hours.
Exquisite structure, beautiful and lightweight, can be carried around the waist or in a pocket, with simple and convenient operation; Good waterproof, high and low temperature resistance, high humidity performance, and can be used in various harsh environments and climatic conditions.
The flashlight is equipped with battery overdischarge, overcharge, and short circuit protection devices; The intelligent charger is equipped with overcharge, short circuit protection, and charging display device.
Two uses:
1. Tighten the tail cover clockwise to achieve long-lasting illumination; Loosen the tail cover counterclockwise by 1/4-1 turn, press and release the leather cover at the back of the flashlight in a cycle to achieve jog lighting.
2. The charging socket is located at the center of the flashlight head. When charging, simply plug the output plug of the charger into the corresponding charging port.
3. The charger is equipped with a built-in charging protection device. When the input terminal of the charger is powered on, the indicator light is red; When the charger output is plugged into the flashlight charging port, the indicator light turns green, indicating that normal charging has begun; After the battery is fully charged, the indicator light turns red again.
4. After being fully charged once, it can be used at any time within 1 year; If not used for a long time, it is recommended to recharge for about 5 hours every six months.
5. During use, when the battery is about to run out, the brightness of the flashlight will sharply decrease. At this time, it should be stopped and charged or replaced with a backup battery.

Warning:
1. Charging or dismantling flashlights must be carried out in a safe place;
2. Charging should be done promptly after each use.
Three notes:
1. When carrying or transporting, the tail cover must be loosened counterclockwise by more than three turns to ensure that the battery will not conduct during transportation.
2. When charging or discharging continuously in places with high ambient temperatures, there is a slight temperature rise on the surface of the flashlight, which is a normal phenomenon.
3. The head of the flashlight is open, and efforts should be made to avoid blockage by mud, sand, and other foreign objects that may affect charging and lighting; After use in corrosive environments or seawater, the surface should be wiped immediately.

Technical parameters of SH/JW7300 miniature explosion-proof flashlight:
Rated voltage: DC3.7V
Rated capacity: 2Ah
Light source (LED): Average service life: ≥ 100000h
Continuous discharge time: 10 hours
Battery charging time: 5 hours
Battery life: 500 cycles
Dimensions: 25.5 × 120.5mm
Weight: 0.129kg