SH/JW7620 Solid state miniature strong light explosion-proof flashlightDetailed product description：

survey:
SH/JW7620 solid-state miniature strong light explosion-proof flashlight is suitable for mobile lighting and signal indication in oil fields, petrochemicals, gas maintenance, military, police, industrial and mining enterprises, and various outdoor workplaces.

Performance:
Explosion proof type has the highest explosion-proof level and can be safely used in flammable and explosive places.
The light source adopts the fourth generation green and environmentally friendly high-power, high brightness white LED, and the reflector adopts high-tech surface treatment technology, with high reflection efficiency. The illumination distance of the lamp can reach more than 100 meters, and the visible distance can reach more than 5000 meters.
It has lighting, strobe, and remote signal indication functions.
High energy memoryless battery, large capacity, long lifespan, low self discharge rate, economical and environmentally friendly; The light source consumes less energy and has a lifespan of up to 100000 hours.
High hardness alloy shell ensures that it can withstand strong impacts; Waterproof and resistant to high and low temperatures, with good high humidity performance, it can be used in various harsh environmental conditions.
The outer surface is deeply anti slip treated, lightweight and beautiful, and can be carried in a pocket with simple and convenient operation.
The internal circuit design of the lamp has protection devices against overcharging, overdischarging, short circuit, and switch misoperation.

Two uses:
1. Pressing the switch at the back of the lamp can achieve continuous illumination; Press again to turn off the light fixture (note: the light fixture does not respond when pressed quickly); Pressing repeatedly can achieve jog lighting.
2. There is a charging socket next to the switch at the rear of the lamp. When charging, simply plug the output plug of the charger into the corresponding charging port.
3. The charger is equipped with a built-in charging protection device. When the input terminal of the charger is powered on and inserted into the charging socket of the lamp, the indicator light turns green, indicating that normal charging has begun; After the battery is fully charged, the indicator light turns red again.
4. After being fully charged once, it can be used at any time within 1 year; If not used for a long time, it is recommended to recharge for about 4 hours every six months.
5. During use, when the battery is about to run out, the brightness of the lamp will sharply decrease. At this time, it should be stopped and charged or replaced with a backup battery.

Warning:
1. Charging or dismantling of lighting fixtures must be carried out in a safe place;
2. Charging should be done promptly after each use.

Three notes:
1. When charging or discharging continuously in places with high ambient temperatures, there is a slight temperature rise on the surface of the lamp, which is a normal phenomenon.
2. The charging ports at the head and tail of the lamp are open, and efforts should be made to avoid blockages caused by mud, sand, and other foreign objects that may affect charging and lighting; After use in corrosive environments or seawater, the surface should be wiped immediately.
3. The maintenance of lighting fixtures must be carried out by professionals in a safe place.

Technical parameters of SH/JW7620 solid-state miniature strong light explosion-proof flashlight:
Rated voltage: DC3.7V
Rated capacity: 1.8Ah
Rated power of light source (LED): 3W (JW7620)/1W (JW7620A)
Average service life: ≥ 100000h
Continuous discharge time: 3h (JW7620)/6h (JW7620A)
Battery charging time: 4h
Battery lifespan: approximately 1000 cycles
External dimensions: φ 28 × 129 mm (outer diameter × length)
Weight: 0.13kg
Shell protection level: IP65