XHH Anchor control boxDetailed product description：

After being combined with the LK911 and LK911A series marine main command controllers, the XHH anchor control box for ship AC double and three speed anchor control can be applied to anchor, start, stop, speed regulation, forward and reverse control, and protection of ship anchor machines, anchor winches, mooring winches, and other devices. The power supply voltage of the control box is three-phase 50Hz, 380V, and the brake of the lifting motor is powered by DC.
Structure of XHH Anchor Control Box

The structure of the control box is protective, and all electrical components are installed inside the box. The incoming and outgoing wires are located at the bottom of the control box. The control box is wall mounted.

Technical parameters of XHH anchor control box
The basic technical data for box making is shown in Table 1

Serial Number	model	Specification			Work schedule (minutes)	structural form	Master controller model
		Rated voltage V	Rated current A	phase number
1B	XHH1-M111JB	380V	twenty-five	three	thirty	Protective type	LK911-126 or LK911-116A
2B	XHH1-M141JB		fifty
3B	XHH2-M142JB		fifty				LK911-127 or LK911-110A
4B	XHH2-M182JB		one hundred
5B	XHH2-M202JB		one hundred and fifty

XHH anchor control box