YJ-150 low-speed diamond cutting machineDetailed product description：

Product Introduction:
The YJ-150 low-speed diamond cutting machine is specifically designed for cutting various hard materials, such as crystals, gemstones, glass, ceramics, etc. Its main characteristics are compact structure, complete functions, and high precision processing, reaching the advanced level of international similar products.

Technical parameters of YJ-150 low-speed diamond cutting machine:

1. Speed range: 20-600 revolutions per minute with stepless speed regulation
2. Power supply: AC 110V/220V
3. Feed positioning accuracy: 0.01 millimeters (mechanical and digital display modes)
4. Angle adjustment: Rotate 360 degrees
5. Maximum travel: 50 millimeters (fine adjustment travel of 25 millimeters)
6. Maximum diameter of circular saw blade: 100 millimeters (4 inches)
7. Automatic interruption cutting: allows unattended operation
8. Digital display shaft speed
9. Length 360mm x Width 260mm x Height 260mm 17.5kgs

YJ-150 low-speed diamond cutting machine
Standard accessories:
1. 1 set of adjustable 2D card tools
2. 1 set of rear end axial adjustable heavy body
3. 1 set of front-end counterweight body
4. 1 mini vise
5. 2 drive motor O-rings
6. One fully sintered diamond saw blade with a diameter of 100 × 12.7 × 0.35
7. Two electroplated diamond saw blades with a diameter of 100 × 12.7 × 0.4
8. 10 pieces of silicon carbide saw blades with a diameter of 100 × 12.7 × 0.4
9. 10 pieces of corundum saw blade with a diameter of 100 × 12.7 × 0.4
10. 2 graphite blocks (50mm x 50mm x 12mm)
11. 1 aluminum carrier plate (25mm × 50mm × 7mm)
12. Two pieces of paraffin wax are used to stick the sample onto the carrier plate
13. 3 sets of clamp saw pads (Φ 62mm, Φ 46mm, Φ 35mm)
Optional purchase items:
1. Sintered diamond saw blade with a diameter of 100 × 12.7 × 0.33
2. Electroplated diamond saw blade with a diameter of 100 × 12.7 × 0.4
3. Silicon carbide saw blade with a diameter of 100 × 12.7 × 0.4
4. Corundum saw blade with a diameter of 100 × 12.7 × 0.4
5. Design saw blade spacing pads for multi blade cutting according to customer requirements
6. Digital micrometer