YMP-2A Type Four Speed Metallographic Sample Grinding and Polishing MachineDetailed product description：

YMP-2A Four speed Metallographic Sample Grinding and Polishing Machine
Product Introduction:
In the process of preparing metallographic specimens, polishing and grinding are two very important processes. Usually, two types of equipment, metallographic specimen pre grinding machine and metallographic specimen polishing machine, are used to complete them. In order to meet the needs of China's industrial and technological development and meet the user's requirements, our company has newly designed and manufactured the YMP-2A four speed metallographic specimen polishing machine. This machine is durable and easy to maintain. When in use, only the grinding disc or throwing disc needs to be replaced to complete various processes such as rough grinding, fine grinding, dry grinding, wet grinding, and polishing of various samples. To meet the preparation requirements of different samples, the diameter of the grinding and throwing disc of this machine is larger than that of similar products in China. There are more options for different line speeds on the working surface, which can increase the effective working surface by 20-30%, improve the grinding and polishing quality of the sample and the preparation efficiency of the sample. The machine rotates smoothly and has low noise, making it an ideal and fully functional best metallographic sample preparation equipment.

Technical parameters of YMP-2A four speed metallographic sample grinding and polishing machine

1. Grinding disc diameter: 250mm; Dropping diameter: 220mm
2. Speed: 1000/500r/min, 600/300r/min
3. Electric motor: YSD802-4/8025/0.37KW/380V
4. Dimensions: 710 × 620 × 350mm
5. Net weight: 80Kg