CSM050P series Hall current sensorDetailed product description：

Description
CSM050P series Hall current sensor is a current sensor that applies the Hall effect closed-loop principle. It can measure DC, AC, pulse, and various irregular waveform currents under electrical isolation conditions.

Electrical parameters

	model	CSM005P	CSM010P	CSM015P	CSM020P	CSM025P	CSM030P	CSM050P
IPN	Primary rated input current	five	ten	fifteen	twenty	twenty-five	thirty	fifty	A
IP	Measurement range of primary current	0～±10	0～±20	0～±30	0～±40	0～±50	0～±60	0～±100	A
	Input pin size	Ф0.8	Ф1.0	Ф1.0	Ф1.4	Ф1.4	Ф1.6	Ф1.6	mm
KN	turns ratio	3：1500	2：2000	1：1500	1：2000	1：2500	1：3000	1：3125
RM	Internal measurement resistance	four hundred	four hundred	four hundred	four hundred	four hundred	four hundred	two hundred and fifty	Ω
VSN	Rated output voltage on the secondary side	4±0.5%							V
VC	power supply voltage	±15(±5%)							V
IC	Current consumption	<25							mA
Vd	insulation voltage	2.5 KV RMS/50Hz/1 minute between primary and secondary circuits
εL	linearity	<0.1							%FS
X	precision	TA =25℃  ±0.7							%
V0	Zero point electrical offset voltage	±25							mV
VOT	Unbalanced voltage temperature drift	IPN=0  TA = -25～+70℃ <±0.5							mV/℃
Tr	response time	<1							us
f	Band width (-3dB)	DC～200							kHz
TA	Working environment temperature	-25～+85							℃
TS	Storage environment temperature	-40～+100							℃
	standard	Q/3201CHGL02-2007

CSM050P series Hall current sensor external dimensions (mm)

CSM050P series Hall current sensor