CSM025PT5 series Hall current sensorDetailed product description：

Product Description: How to Translate
A current sensor utilizing the Hall effect closed-loop principle can measure currents of DC, AC, pulse, and various irregular waveforms under electrically isolated conditions.
Electrical parameters
Measurement range of primary current

	model		CSM005PT5	CSM010PT5	CSM015PT5	CSM025PT5
IPN	Primary rated input current		five	ten	fifteen	twenty-five	A
IP	0～±16	0～±32	0～±48	0～±80	A
	Input pin size		Ф0.8	Ф1.0	Ф1.0	Ф1.4	mm
KN	turns ratio		2：1600	1：1600	1：1200	1：1500
RM	Internal measurement resistance		one hundred	one hundred	fifty	thirty-seven point five	Ω
VSN	Rated output voltage on the secondary side		0.625±0.5%				V
VC	power supply voltage		+5(±5%)				V
IC	current consumption		<25				mA
Vd	insulation voltage		2.5 KV RMS/50Hz/1 minute between primary and secondary circuits
εL	linearity		<0.1				%FS
X	precision		TA =25℃ ±0.7				%
V0	Zero point electrical offset voltage		±25				mV
VOT	Unbalanced voltage temperature drift		IPN=0 TA =-25～+85℃ <±0. five				mV/℃
di/dt	Follow accuracy		>50				A/uS
Tr	response time		<500				ns
f	Band width (-3dB)		DC～200				kHz
TA		Working environment temperature	-25～+85				℃
TS		Storage environment temperature	-40～+100				℃

Dimensions (mm) and external wiring diagram

Instructions for Use
1. Incorrect wiring may cause damage to the sensor. After the sensor is powered on, when the measured current passes through the direction of the sensor arrow, the in-phase voltage value can be measured at the output terminal.
2. Sensors with different rated input currents and output voltages can be customized according to user needs.