JSZV-6.10R and JSZVR-6.10W voltage transformers adopt epoxy resin casting fully enclosed structure

The JSZV-6, 10R type is composed of two fully insulated voltage transformers with a "V" connection. The primary winding is protected by a fuse, and the secondary output is 100V for measurement purposes. In addition, it has a 110V 220V output voltage terminal as the power supply for the operating mechanism. The power capacity is 1100VA. The fuse is installed inside the primary terminal. The JSZVR-10W type is composed of two single-phase voltage transformers with fuses cast together, and the primary and secondary terminals are led out separately. Users can connect them into V-type three-phase voltage transformers as needed, or use them separately without affecting each other. The fuse is installed inside the primary terminal, and when replacing it, there is no need to remove the external wiring in the event of a power outage, which is very convenient and fast. The normal secondary output of the product is 100V. There are also 110V and 220V control power supplies available as needed, with a power capacity of 1100VA.

1. Equipped with XPNP1-10 type 0.2A fuse
2. According to requirements, it can also be made into 0.2/0.2; 0.5/0.5; 0.2/0.5 (as shown in the wiring diagram)

JSZV-6.10R, JSZVR-6.10W Voltage Transformer