JDZX11-35R series single-phase voltage transformer with fuseDetailed product description：

The JDZX11-35R series single-phase voltage transformer with fuse is an epoxy resin vacuum cast fully enclosed structure, which is used for voltage and energy measurement and protection between the connected phase and ground.


The JDZX11-35R series single-phase voltage transformer with fuse has a large output capacity, high accuracy, and small partial discharge capacity. Its biggest feature is that it has fuse protection at once, which can eliminate the trouble caused by users configuring fuses again, greatly avoiding the waste of effective space in the switchgear. Moreover, the fuse replacement is very convenient and can be directly installed inside the transformer. The melting current of the fuse matches the short-circuit withstand capacity of the transformer, effectively protecting the transformer from burning out in case of power grid faults. Secondary outgoing lines with protective covers can avoid electric shock accidents and phenomena.
The product complies with the standards GB1207 and IEC186;
Rated insulation level: 40.5/95/185kV;

The rated voltage ratio, accuracy level combination, and corresponding rated secondary output are shown in the table:

model	Rated voltage ratio (kV)	Accurate level combination	rated output (VA)	Maximum output (VA)	Rated insulation level (kV)
JDZX11-35R	35/√3/0.1/√3/0.1/3	0.2/6P(3P) 0.5/6P(3P)	30/100 100/100	six hundred	40.5/95/200
JDZXF11-35R	35/√3/0.1/√3/0.1/√3/0.1/3	0.2/0.2/6P(3P) 0.2/0.5/6P(3P) 0.5/0.5/6P(3P)	15/15/100 15/30/100 30/30/100	2×300	40.5/95/200

JDZX11-35R series single-phase voltage transformer with fuse