JDZX9-35W2 voltage transformer is suitable for voltage and energy measurement and relay protection in indoor power systems with rated frequency of 50Hz and rated voltage of 35kV. When the transformer is excited at rated voltage, it can withstand an external short circuit for 1 second without damage.

JDZX9-35W2 voltage transformer adopts epoxy resin fully enclosed casting, pillar structure, resistant to pollution and moisture, suitable for use in tropical regions. Transformers do not require special maintenance, only regular cleaning of surface dirt is needed. Due to the use of fully enclosed cast insulation, transformers are small in size, light in weight, and suitable for installation in any position and direction.

Install a wiring terminal box at the secondary outlet terminal, with one outlet hole on the front and one on each side, providing three directions for secondary wiring, ensuring safety and reliability.

The product complies with the standards GB1207 and IEC186;
Rated insulation level: 40.5/95/185kV;
The rated voltage ratio, accuracy level combination, and corresponding rated secondary output are shown in the table

JDZX9-35W2 Voltage Transformer