GJ series AC zero crossing solid-state relayDetailed product description：

GJ series AC zero crossing solid-state relay

Features:
The zero crossing relay for communication has the characteristics of zero voltage on and zero current off, thus it has the advantages of low interference to the power grid and significant reduction of surge current when driving incandescent lamp loads.

Main technical performance indicators of GJ series AC zero crossing solid-state relay: (ambient temperature 25 ℃)

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		three		12(*32)	VDC
Turn off voltage				one	VDC
input current	Vin=5VDC		ten		mA DC
insulation resistance		one hundred and nine			Ω
insulation voltage	50Hz Ac	two thousand and five hundred			V(RMS)
Critical conduction voltage		three			VDC
load voltage scope		twenty		two hundred and forty	V(RMS)
surge voltage	20ms non-repeating			one thousand	%Load current
Zero crossing voltage				±15	V(Peak)
On state pressure drop	Maximum load current		one point eight		V(RMS)
Broken state leakage current	220V50Hz			≤5	mA （RMS）
on-time	50Hz			ten	ms
turn-off time	50Hz			ten	ms

model	Load current A
GJ1—L	one
GJ1—W	one
GJ2—L	two
GJ2—W	two
GJ3—L	three
GJ3—W	three
GJ5—W	five
GJ10—W	ten
GJ25—W	twenty-five
GJ40—W	forty
GJ80—W	eighty
GJ100—W	one hundred
GJ120—WM	one hundred and twenty
GJ200—WM	two hundred
GJ300—WM	three hundred

The input voltage of 3-32V is constant current (usually constant current for voltages ≥ 10A)
Input voltage of 3-12V is of series resistance type (usually<10A)
When the input terminal of the series resistor type exceeds 12VDC, please connect an appropriate resistor in the input circuit to ensure that the input current is around 10mA, or specify the input voltage requirement when ordering.