GJH-W Series AC High Voltage Three Phase Solid State RelayDetailed product description：

GJH series AC high-voltage three-phase solid state relay

Features:
The GJH series three-phase AC solid-state relay is an electronic switch designed with high reliability for three-phase AC loads. It can directly control loads such as motors and heaters, with advantages such as fast switching speed, no noise, corrosion resistance, and anti-interference. It can interface directly with computer systems and automatic control devices, and its input action signal can be indicated by LED.

Main technical performance indicators: (ambient temperature 25 ℃)
Model Load Current A
GJH15—W—3 15
GJH25—W—3 25
GJH40—W—3 40
GJH55—W—3 55
GJH80—W—3 80
GJH100—W—3 100

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		four point five		thirty-two	VDC
input current	Vin=5VDC		twenty		mA DC
insulation resistance		one hundred and nine			Ω
insulation voltage	50Hz	two thousand and five hundred			V(RMS)
Critical conduction voltage		four point five			VDC
Turn off voltage				one	VDC
load voltage scope		twenty		four hundred and eighty	V(RMS)
surge voltage	20ms non-repeating			one thousand	%Load current
On state pressure drop	Maximum load current		one point eight		V(RMS)
Broken state leakage current	380V50Hz			≤5	mA （RMS）
on-time	50Hz			ten	ms
turn-off time	50Hz			ten	ms

The input voltage of 3-32V is constant current (usually constant current for voltages ≥ 10A)
Input voltage of 3-12V is of series resistance type (usually<10A)
When the input terminal of the series resistor type exceeds 12VDC, please connect an appropriate resistor in the input circuit to ensure that the input current is around 10mA, or specify the input voltage requirement when ordering.