GJNH series AC three-phase non zero crossing solid-state relayDetailed product description：

Characteristics:
The conduction time of GJNH series three-phase AC solid-state relay is 1ms (50Hz), which is faster than GJH series. Other electrical parameters and external installation dimensions can refer to the corresponding varieties of GJH three-phase series.

Main technical performance indicators of GJNH series AC three-phase non zero crossing solid-state relay: (ambient temperature 25 ℃)

Model Load Current A
GJNH15—W—3 15
GJNH25—W—3 25
GJNH40—W—3 40
GJNH55—W—3 55

input parameters	test conditions	minimum	typical value	maximum	unit
Control voltage range		four point five		thirty-two	VDC
input current	Vin=5VDC		twenty		mADC
insulation resistance		one hundred and nine			Ω
insulation voltage	50Hz Ac	two thousand and five hundred			V(RMS)
Critical conduction voltage		four point five			VDC
Turn off voltage				one	VDC
load voltage scope		twenty		four hundred and eighty	V(RMS)
surge voltage	20ms non-repeating			one thousand	%Load current
On state pressure drop	Maximum load current		one point five		V(RMS)
Broken state leakage current	380V50Hz			five	mA （RMS）
on-time	50Hz			one	ms
turn-off time	50Hz			ten	ms

The input voltage of 3-32V is constant current (usually constant current for voltages ≥ 10A)
Input voltage of 3-12V is of series resistance type (usually<10A)
When the input terminal of the series resistor type exceeds 12VDC, please connect an appropriate resistor in the input circuit to ensure that the input current is around 10mA, or specify the input voltage requirement when ordering.