| Product name: | Horizontal passive control single-phase AC solid-state relay | ||||||
| specification: | ![]() |
||||||
| Category: | low-voltage electrical apparatus -- solid state relay | ||||||
| Price: | factory price | ||||||
| Brand: | Shanghai | ||||||
| Place of Origin: | China | ||||||
| Available Quantity: | batch | ||||||
| delivery cycle: | Spot goods (or inquire by telephone) | ||||||
|
|||||||
| model | JGJ17 | JGJ17B | |
| lose enter ginseng number |
Control switch withstand voltage | The working voltage is greater than 1.5 times the maximum load voltage | |
| Control switch current | Connect the working current to be greater than 100mA | ||
| On-off time | Activate 5 ≤ mS; Disconnect ≤ 20 mS | ||
| lose go out ginseng number |
output state | A set of normally open | A set of normally closed |
| load voltage | 110~240VAC 20~440VAC | ||
| Maximum load current | 10、20、……100、120、150、180A | ||
| Off state voltage | ≥600V ≥ 900V | ||
| On state pressure drop | ≤1.8 V | ||
| sex can ginseng number |
isolation voltage | The control end and output end must be optically and non electrically isolated, and attention must be paid when using them. | |
| insulation voltage | ≥2500V | ||
| insulation resistance | ≥100MΩ | ||
| Operating Temperature | —25~75 ℃ | ||
| power frequency | 50/60HZ | ||
| Heat dissipation conditions | ≥ 20A with radiator, ≥ 40A with fan for strong cooling | ||
| Load current safety factor | Resistive load is taken as 2-3 times, inductive load is taken as 3-4 times | ||
| External dimensions (code) | 58 × 45 × 21 mm3 (J-1) or 59 × 45 × 24 mm3 (J-7) | ||
JGJ17, JGJ17B Horizontal Passive Control Single phase AC Solid State Relay Dimensions Installation wiring diagram: (unit: mm)


JGJ17, JGJ17B Horizontal Passive Control Single phase AC Solid State Relay