Cycloid pinwheel reducerDetailed product description：

XLK cycloidal pinwheel reducer is a relatively new type of transmission mechanism, and its unique smooth structure can replace ordinary cylindrical gear reducers and worm gear reducers in many cases, because cycloidal pinwheel reducers have:
1. High speed ratio and high efficiency
2. Compact structure and small volume
3. Smooth operation with low noise
4. Reliable use and long lifespan
5. Reasonable design, easy maintenance, and easy disassembly and installation

XLK cycloidal pinwheel reducer is a novel reduction device that adopts the principle of few tooth difference planetary transmission. It can be widely used in industries such as petroleum, chemical, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation, etc. As a driving or reduction device, it is suitable for working temperatures of plus or minus 40 degrees. Therefore, cycloidal pinwheel reducer is widely welcomed by users and widely used in various industries and fields

Installation of X-planetary cycloidal pinwheel reducer:
1、 When calibrating the X planetary cycloidal reducer, steel or cast iron pads can be used, with no more than three pads in height. Alternatively, a wedge iron can be used, but after calibrating the reducer, a flat pad should be replaced.
2、 The configuration of cushion blocks should avoid causing deformation of the machine body. They should be symmetrically arranged on both sides of the foundation bolts, with sufficient distance to allow the water slurry to flow freely during irrigation
3、 When installing couplings, pulleys, sprockets, and other connecting components on the output shaft of the X planetary cycloidal reducer, direct hammering is not allowed because the output shaft structure of the reducer cannot withstand axial hammering force. The connecting components can be pressed into the shaft end screw holes by screwing in screws.
4、 The shaft diameter of the output shaft and input shaft is selected to match GB1568-79.
5、 The lifting ring screws on the gearbox are only used for lifting the gearbox.
6、 When installing the reducer on the foundation, the installation centerline elevation, levelness, and related dimensions of the connected parts of the reducer should be calibrated. The concentricity of the calibration installation shaft should not exceed the range allowed by the coupling.