The WHC reducer complies with the departmental standard JB2318-79, meeting the requirements of standardization and serialization. Suitable for deceleration transmission of various mechanical equipment in metallurgy, mining, lifting, transportation, chemical industry, construction, etc. The input power range of this series of worm gear reducers is between 0.4-163KW; The input torque is between 11-2600 kgf · m, and the input shaft speed is generally not greater than 1500 revolutions per minute; The high-speed shaft can operate in both directions; When the working environment temperature is below 0 ℃, the lubricating oil must be heated to above 0 ℃ before starting.

Gearboxes are generally used for low-speed and high torque transmission equipment, such as electric motors The internal combustion engine or other high-speed power is reduced by meshing the large gear on the output shaft with the gear with fewer teeth on the input shaft of the reducer. Ordinary reducers also have several pairs of gears with the same principle to achieve the ideal reduction effect. The ratio of the number of teeth between the large and small gears is the transmission ratio.
representation method

WHC gearbox