BCD-W Explosion proof high-frequency infinite pole lampDetailed product description：

Detailed Information: Bcd-W Explosion proof High Frequency Endless Lamp
Protection level: IP65
Equipped with light source: 21st century new energy-saving and environmentally friendly infinite light source, 35W~185W
Rated voltage and frequency: 220V ± 10%/50Hz
Applicable height: 3m-10m

Characteristics of non-polar lamp fixtures:
Cast aluminum alloy shell, surface sprayed with plastic. The lamp body, frame, and tailstock of the lamp are made of aluminum alloy die-casting, with a lightweight and sturdy structure.
The reflector of the lamp is integrated with tempered glass using silicon sealant, which has the characteristics of high strength, good transparency, and easy installation.
The heat sink structure of the lamp is made of aluminum stretched profiles, and the high-purity anodized aluminum plate is stretched to form a reflective cover.
The lighting fixtures are equipped with stainless steel fasteners for easy installation and maintenance.
Adopting a complete set of stainless steel fasteners.

Scope of application for explosion-proof lamps without limit:
Hazardous areas with explosive gas mixtures: Zone 1, Zone 2.
Explosive gas mixture: IIA, IIB, IIC.
Temperature group: T1 to T3.
Explosion proof signs: Exd Ⅱ BT3, * Exd Ⅱ CT3, * Exde Ⅱ CT3.

BCD-W Explosion proof High Frequency Endless Lamp Features:
1. Long lifespan:
The light bulb has no filament or electrode, and uses high-quality rare earth tricolor fluorescent powder and anti-aging technology. Lifespan of over 60000 hours
2. Energy saving - up to 75% high luminous brightness: The mechanism of the infinite pole lamp is the discharge of inert gas in a vacuum environment, and the luminous brightness is much higher than that of traditional gas discharge lamps.
High visible light ratio: The proportion of visible light in the light emitted by high-frequency induction lamps is as high as 80%. Therefore, when testing its data with a traditional illuminance meter, even if its data is lower than that of high-power high-pressure sodium lamps in the same environment, the visual environment effect of the human eye is still better than the latter. The data generated by traditional illuminance meters contains a large amount of invisible light, while the proportion of invisible light in high-pressure sodium lamps is quite high. The power factor is high: the power factor of high-frequency non-polar lamps is as high as 98%, greatly reducing reactive power losses.
3. Other characteristics of induction lamps: no flicker, good color rendering, excellent electrical performance, high reliability, low current harmonics, constant output luminous flux, optional color temperature, low glare, comfortable and non glaring, can be made into color: widely used, instant start, no need for preheating: reduces lighting interruption caused by power outages, suitable for emergency lighting. Repeated switching does not affect the lifespan and does not cause the light decay phenomenon of ordinary electrode lamps; Green and environmentally friendly, using solid mercury amalgam: no mercury pollution, in line with environmental requirements. Electromagnetic interference (EMC) complies with national standards; Low surface temperature, touchable by hand: high safety.