FAZ - □ series waterproof, dustproof, and anti-corrosion ballasts are suitable for:

1. Environmental temperature -25 ° C to 55 ° C
2. The installation height shall not exceed 2000m above sea level.
3. Corrosion caused by strong acids and alkalis, as well as environments with high levels of water, dust, and humidity.
4. A matching light source must be selected, and the fluctuation range of the user's power supply voltage must meet the requirements of national standards.

Product Features:
1. The FAZ - □ series waterproof, dustproof, and anti-corrosion ballasts are resistant to strong acid, alkali, and salt corrosion, waterproof and dustproof, with an anti-corrosion level of F2 and a protection level of IP66.
2. All exposed fasteners are made of stainless steel, and the seals are made of silicone rubber, which is resistant to oil, acid, alkali, and high temperature.
3. Used in conjunction with a single light fixture, it also serves as a wiring and distribution box.
4. The technical parameters of the built-in ballast are the same as those of Philips and Yaming. It is strongly recommended that users configure Philips and Yaming light sources.
5. Power compensators can be installed according to user requirements, and the compensated power factor can reach 0.9 or above.

Ordering Instructions
1. Complete order product models must be provided.
2. Please provide written explanations for any special requirements.  

FAZ - □ series waterproof, dustproof, and anti-corrosion ballasts model meaning:


Main technical parameters:

FAZ - □ series waterproof, dustproof and anti-corrosion ballasts