ZYS series compressor dedicated three-phase asynchronous motorDetailed product description：

The ZYS series compressor specific three-phase asynchronous motor is a motor developed and designed specifically for the special working conditions of the compressor. The center height ranges from H132 to H400, the power ranges from 5.5kW to 500kW, the insulation level is F level, and the rated temperature rise is assessed according to B level. The temperature rise under general service factor is assessed according to F level, and the service factor includes SF: 1.10, 1.15, 1.20 and other service factors (i.e. the actual power of the motor can reach the rated power multiplied by this service factor).

This series of motors adopts a special bearing configuration to ensure that the bearings can work normally for a long time. Considering that the motor cable is directly connected to the compressor's electrical control box, we can provide customers with an extended lead out configuration, which is protected by cable sleeves and has pipe screw sleeves at both ends. This series of motors has the advantages of high efficiency, energy saving, stable performance, and is suitable for long-term continuous operation of compressors.

The performance and installation dimensions of the ZYS series compressor dedicated three-phase asynchronous motor comply with IEC60034 standards, DIN42673 standards, GB755 standards, and relevant professional technical standards. And the company has passed ISO9001 international quality system certification multiple times. Control the entire process from order, development, manufacturing, inspection, sales, to service in accordance with the requirements of ISO9001 quality system.

The power supply is three-phase power frequency 50Hz (or designed as a variable frequency motor as needed); The power supply voltage level is 380V, and can also be designed as 400V, 500V, 550V, etc. according to customer needs.

The general connection method for ZYS series compressor dedicated three-phase asynchronous motors is Y connection for power below 3kW and Δ connection for power above 4kW.
Working environment: Temperature not exceeding 40 ℃, altitude not exceeding 1000m. Please specify special environmental conditions when placing an order.
Adopting the internationally recognized protection level of IP54 or IP55.

The working mode is continuous work system (S1).
Adopting high magnetic conductivity and low loss silicon steel sheets, resulting in low loss and high efficiency.
The basic ventilation method is IC411 or IC416, and the cooling and heat dissipation conditions are relatively mature.
It has the characteristics of high efficiency, energy saving, low vibration, low noise, reliable performance, and easy installation and maintenance.