FGL-125 Waterproof, Dustproof, and Anti Corrosion Lamp:
The shell is made of glass fiber reinforced unsaturated polyester resin (SMC) pressed, with a lightweight structure and beautiful appearance;
This product is resistant to strong acid, strong alkali, salt, and ammonia corrosion, waterproof, and dustproof. The corrosion level is WF2 and the protection level is IP65;
Tempered glass lampshade, all exposed fasteners are made of stainless steel, and the sealing components are made of silicone rubber, which is oil resistant. Acid resistant. Resistant to alkali and high temperature;
There are various installation methods, and the lampshade can be quickly opened for easy maintenance;
Applicable environment and purpose:
Environmental temperature -25 ° C to 55 ° C;
The installation height shall not exceed 2000m above sea level;
Strong acid, strong alkali, salt, ammonia corrosion, and environments with high water, dust, and humidity;
Widely applicable to factories and enterprises in petroleum, chemical, port, food, pharmaceutical, military and other industries. Mainly used as factory lighting, especially for workshop lighting with strong corrosiveness;
According to different light sources, a matching ballast must be selected. The conventional configuration of the ballast is an aluminum alloy shell. If stainless steel is required, please specify. The fluctuation range of the user's power supply voltage must meet the requirements of national standards.
Technical parameters of FGL-125 waterproof, dustproof and anti-corrosion lamp:
|
model |
Rated voltage |
Applicable light source/code |
rated power |
lamp holder |
Introduction port specifications |
Applicable cable outer diameter |
Protection Rating |
|
FGL-125 |
50Hz
AC220V |
B: Incandescent lamp |
200W |
E27 |
G3/4'' |
¢10-¢14mm |
IP65
WF2 |
|
Z: Self regulating mercury lamp |
125W、160W |
|
G: High pressure mercury lamp |
80W、125W |
|
N: High pressure sodium lamp |
70W、100W |
|
L: Metal Halide Lamp |
70W、100W |
FGL-125 Waterproof, Dustproof, and Anti Corrosion Lamp