BAT53 series explosion-proof floodlightDetailed product description：

Product Features
Composite explosion-proof structure design, with protection performance up to IP65, suitable for both indoor and outdoor use;
The shell material is selected from high-quality aluminum alloy, and the "high-temperature one-time die-casting" molding process is used. The product surface is smooth, the internal metal structure is finely organized, and the product surface has a permanent explosion-proof mark molded by compression molding;
High voltage electrostatic spraying on the surface, with uniform adhesion and strong adhesion of the plastic layer, superior anti-corrosion, anti-oxidation and other properties;
The lamp comes with a high-quality inductive ballast made of double insulated enameled wire and high-temperature resistant insulation material, which has stable working performance, low power consumption and temperature rise, and long service life.
The transparent device is made of high-strength tempered glass and has undergone strict impact and heat resistance tests, ensuring reliable explosion-proof performance and high light transmittance;
The lamp is equipped with a high-purity reactor, designed using computer simulation, with high utilization coefficient, precise light distribution, and excellent glare control;
The projection direction of the lamp can be adjusted within+45 degrees to -45 degrees in the vertical direction, and the bulb can be quickly replaced by opening the cover on the side;
Execution standards: GB3836.1-2000, GB3836.2-2000, GB3836.3-2000.

Applicable environment and purpose:
Suitable for hazardous areas in Zone 1 and Zone 2;
Suitable for explosive gas environments of Class IIA, IIB, IIC T4 and below;
Widely applicable for large-scale floodlighting in places such as factories, substations, coal yards, ports, oil well platforms, etc.

Technical parameters:

model	Rated voltage	Applicable light source/code	rated power	Explosion-proof marking	lamp holder	Introduction port specifications	Applicable cable outer diameter	Protection Rating
BAT53	50Hz AC 220V	N: High pressure sodium lamp (tube type)	150W、250W	ExdeIIBT3 *ExdeIICT3	E40	G3/4	￠10-￠14mm	IP65 WF1
		L: Metal Halide Lamp (Tube Type)	175W、250W

BAT53 series explosion-proof floodlight