CBB20S Type Metallized Polypropylene Film Dielectric DC Fixed CapacitorDetailed product description：

The CBB20S metalized polypropylene film dielectric DC fixed capacitor uses polypropylene film as the dielectric, vacuum evaporated metalized electrodes, wrapped with polyester heat-resistant tape, encapsulated with epoxy resin, and axially led out at all four ends.
Small size, light weight, low loss, high reliability.
Used in 50Hz AC circuits, particularly suitable for railway signal detection systems.

Technical and performance indicators
Climate category: 55/085/21
Allowable deviation of capacitance: ± 5% (J); ±10%(K); ±20%(M);
Loss tangent: (1KHz)
Insulation resistance:
CR ≤ 0.33µF ≥25000MΩ
CR > 0.33µF ≥7500S
Voltage endurance: ≥ 1.4UR (2S)

Rated voltage, nominal capacitance, and size

rated voltage	300VA.C.			Lead size
Overall dimensions mm
Nominal capacitance µ F	B	H	L	d
zero point zero one two five	six	twelve	fifteen	zero point six
zero point zero two five	seven	thirteen	fifteen	zero point six
zero point zero five	seven	thirteen	twenty	zero point six
zero point one	six point five	twelve	twenty	zero point six
zero point two	nine	fifteen	twenty	zero point six
zero point four	eleven	seventeen	twenty-four	zero point eight