170*170) type rubber shock absorber padDetailed product description：

SD type rubber vibration isolation pad is formed by vulcanization of oil resistant rubber. It has properties such as oil resistance, corrosion resistance, and aging resistance. It is a universal vibration isolation component developed based on the dynamic characteristics of rubber. It has the characteristics of simple structure, easy installation and use, and is widely used in vibration isolation and noise reduction of various mechanical equipment. It has significant effects on isolating high-frequency and impact vibrations of machinery and reducing solid sound transmission of building structures.

The SD type rubber vibration isolation pad has three types of rubber hardness: 40 °, 60 °, and 80 °, with a basic quick size of 85mm * 85mm. It can be cut and combined according to different load requirements of mechanical equipment. The vibration isolation pad can also be used after multiple layers are connected in series. Its load is still a single-layer load, but the natural frequency can be reduced, resulting in better vibration isolation effect. Multiple layers are separated by steel plates and bonded together with adhesive.

Working temperature: -5~50 ° C, damping ratio of 0.098, natural frequency range of 5~18Hz.
Model Description: SDXX-X
S-shaped fault
D - Rubber pad

X (1) - Vibration isolation pad hardness: 4 is 40 °, 6 is 60 °, 8 is 80 º
X (2) - Number of isolation cushion layers: 1 for one layer, 2 for two layers, and so on
X (3) - Number of isolation pads per layer: each block is 85mm * 85mm, 1 is one block, 2 is two blocks, and so on