GZ-90LED type aviation obstruction lightDetailed product description：

The GZ-90LED aviation obstacle light is controlled by a single-chip computer as the core component of the entire lamp, which is perfectly combined with high-quality electronic components to control the pulse xenon tube to emit strong flashes. Equipped with a light controlled switch, four lamps flash alternately, and a composite lens made of polycarbonate plastic is used to concentrate the light, making the flash stronger. The voltage range is up to AC85V-260V, and the lamp housing adopts an integrated aluminum alloy design.

There are three synchronous flicker control methods to choose from:
1. Ordinary type - using a centralized control box to achieve synchronous flashing.
2. Intelligent - using synchronous cables and holding hands to achieve synchronous flashing.
3. Digital type - using power line carrier remote control technology, synchronization can be achieved without the need for a control box or synchronization line. The synchronous flashing principle of GZ-90- (T, R) type aviation obstruction lights is based on that of GZ-6 (T, R) type aviation obstruction lights.

Operating Voltage	AC：220V　DC：12V
dynamic power	<5W
Flash frequency	20~60 times/minute
Light controlled sensitivity	About 200LX
fluorescent tube	HP High Brightness LED Chip from the United States
Flash tube lifespan	100,000 hours
Effective light intensity	>5Km(T=0.95)
Work Environment	-40℃～+70℃
Protection Rating	IP65
Normal insulation voltage strength	2000V 50Hz, 1mA, 1-minute no breakdown, no arcing phenomenon
Chassis installation dimensions	Circular joint with a diameter of 120mm and uniformly distributed 3-M10X50mm bolts
Net weight of lamp	2.2KG