JKV/JKLV-0.6/1kV Copper/aluminum core PVC insulated overhead cableDetailed product description：

The JKV/JKLV-0.6/1kV copper core/aluminum core PVC insulated overhead cable consists of a compression conductor, weather resistant insulation, and corresponding semiconductive shielding, which not only has the mechanical properties of an overhead line, but also has the safe transmission characteristics of a power cable. Compared with bare wires, it has the characteristics of small installation spacing, high safety and reliability, and excellent resistance to atmospheric aging. It is a preferred cable variety for urban and rural transmission projects.

Cable execution standard:
GB12527-90 1kV overhead insulated cables
(Refer to international IEC502 and IEC227 standards);
CB14049-93 10kV overhead insulated cable.
Characteristics of use of overhead insulated power cables:
1) Rated voltage; 1kV、10kV。
2) Maximum operating temperature of cable conductor;
Cross linked polyethylene insulation; 90℃
High density polyethylene insulation; 75℃
3) The maximum temperature of the cable conductor during a short circuit (with a maximum duration of no more than 5 seconds);
Cross linked polyethylene insulation at 250 ℃;
High density polyethylene insulation at 150 ℃;
4) The ambient temperature during cable laying should not be lower than -20 ℃;
5) Allowable bending radius for cables;
A. 1kV overhead insulated cable;
For cables with an outer diameter less than 25mm, it should not be less than 4D;
Cables with an outer diameter of 25mm or more should not be less than 6D;
B. 10kV overhead insulated cable
Single core cable: 20 (D+d) ± 5% mm;
Multi core cable: 15 (D+d) ± 5% mm;
Among them, D is the actual outer diameter of the cable.
D is the actual outer diameter of the cable conductor.
The main technical performance of overhead insulated cables:
1) Nominal cross-section, reference outer diameter, approximate weight (kg/km): see Table 1.
Partial discharge experiment: A 10kV cable with insulation shielding is immersed in water, and an AC voltage of 9kV is applied. The discharge capacity of the cable is not greater than 20pC.

Purpose:
Polyvinyl chloride insulated overhead cables are used for overhead fixed laying and household lines, and are only suitable for voltage levels of 0.6/1kv. During cable operation, they should not come into frequent contact with trees.
Standard: GB12527-90
Conductor: Copper or Aluminum Core
Insulation: Polyvinyl chloride
Bending radius:
For cables with an outer diameter less than 25mm, it should not be less than 4D
Cables with an outer diameter of 25mm or more should not be less than 6D
Temperature range: 0 ℃~90 ℃

Table 1:

0.6/1kV two core copper/aluminum core PVC insulated overhead cable (JKV/JKLV)
Nominal cross-section (mm2)	Reference outer diameter (mm)	Approximate weight (kg/km)
		copper core	aluminum core
sixteen	four point eight	three hundred and sixty-one	one hundred and fifty-eight
twenty-five	six	five hundred and twenty-one	two hundred and seventeen
thirty-five	seven	seven hundred and thirty-three	three hundred and two
fifty	eight point three	nine hundred and sixty-nine	three hundred and eighty-seven
seventy	nine point eight	one thousand three hundred and thirty-six	five hundred and thirteen
ninety-five	eleven point five	one thousand eight hundred and eighty-two	seven hundred and fifteen
one hundred and twenty	twelve point nine	two thousand three hundred and forty-eight	eight hundred and seventy-two
one hundred and fifty	fourteen point five	two thousand nine hundred and fifty-four	one thousand and ninety-eight
one hundred and eighty-five	sixteen	three thousand five hundred and thirty-six	one thousand three hundred and twenty
two hundred and forty	eighteen point three	four thousand six hundred and nine	one thousand seven hundred and nine