YTDP210 series elevator motorDetailed product description：

Characteristics and Applications:

The YTDP210 series elevator motor has a set of working windings, a protection level of IP44 for the outer shell, and a cooling method of IC411. The motor is flange mounted and has a power of 7.5 kW or less. The electric motor is suitable for variable frequency speed regulation elevators and can be installed on various mechanical deceleration traction machines. It can be used in conjunction with various types of frequency converters at home and abroad, and can meet the working conditions of frequent starting and braking up to 240 times per hour.

Motor performance:

The electric motor is suitable for variable frequency speed regulation elevators and can be used in conjunction with various types of variable frequency devices at home and abroad. It can meet the working conditions of frequent starting and braking up to 240 times per hour.
The insulation level of the electric motor is Class F.
The effective value of the vibration velocity measured by the motor under no-load condition with half key on the shaft extension shall not exceed 1.12mm/s.
The A-weighted sound pressure level (Lp) noise measured by the motor under no-load conditions shall not exceed 70dB (A).

YTDP210 series elevator motor model description:



Structure Introduction:

The electric motor has a set of working windings.
The protection level of the motor casing is IP44.
The cooling method of the electric motor is self fan cooling, which complies with the regulations of IC411.
The structure and installation type of the electric motor are flange installation type (IM3002).
The electric motor adopts rolling bearings.
On the extension of the secondary shaft of the electric motor, users can install a hollow shaft rotary encoder themselves.

Note:

Please pay attention to the model, power, rated voltage, rated frequency, number of poles, and installation structure of the electric motor when placing an order.
For variable frequency elevator motors, it is also necessary to indicate what kind of encoder is installed, whether a thermistor is required, and what kind of thermistor is needed. If there are special requirements for motor power, rated voltage, rated frequency, number of poles, etc., please specify them when placing an order.

serial number

model

power

rated voltage

rated frequency

polar number

rated speed

rated torque

rated current

Motor moment of inertia

weight

R

L

SERIAL No.

TYPE

POWER

RATED CURRENT

MOMENT OF INERTIA JM

WEIGHT

(kW)

(V)

(Hz)

(r/min)

(N.m)

(A)

(kg.m2)

(kg)

(mm)

(mm)

one

YTDP210.13-4

five point five

three hundred and eighty

fifty

four

one thousand four hundred and fifty

thirty-five

twelve

zero point zero two eight

eighty

0

four hundred and seventy-five

two

YTDP210.18-4

six point four

forty point eight

thirteen point two

zero point zero three eight

ninety-seven

five hundred and twenty-five

three

YTDP210.18-4

seven point five

forty-seven point seven

fifteen point five

zero point zero three eight

ninety-seven

five hundred and twenty-five

four

YTDP210.13-6

three

six

nine hundred and sixty

twenty-eight point six

seven point five

zero point zero three eight

eighty

four hundred and seventy-five

five

YTDP210.16-6

four

thirty-eight point two

nine point five

zero point zero four eight

ninety-two

five hundred and twenty-five

six

YTDP210.20-6

five point five

fifty-two point five

twelve point eight

zero point zero five eight

ninety-seven

five hundred and twenty-five

seven

YTDP210.20-6

six point four

sixty-one point one

fourteen point six

zero point zero five eight

ninety-seven

five hundred and twenty-five

YTDP210 Small Power Variable Frequency Speed Control Elevator Three phase Asynchronous Motor Horizontal Flange Installation Type (IM3002)