The shell protection level of YZFT series elevator motors is drip proof, which complies with IP21 regulations; The cooling method is self fan cooling, which complies with the regulations of IC01; The structure and installation type are vertical flange installation type (IMV1). The electric motor has a set of working windings, suitable for escalators, and can be matched with corresponding escalator traction machines to meet the required operating conditions of the escalator. The motor rating is a continuous rating based on S1.

Motor performance:

Electric motors are suitable for escalators and can meet the operating conditions required by escalators. The rating of electric motors is a continuous rating based on the working system S1.
The insulation level of the electric motor is Class F.
The efficiency of the electric motor is not less than 84%, and the power factor is not less than 0.71.
The starting torque of the electric motor is 2.4 times the rated torque.
The starting current of the electric motor is 5 times the rated current.
The maximum torque of the electric motor is 2.6 times the rated torque.
The effective value of the vibration velocity measured by the motor under no-load conditions shall not exceed 1.12mm/s.
The A-weighted sound pressure level (Lp) noise measured by the motor under no-load conditions shall not exceed 56dB (A).
The electric motor can be matched with YZFZ54-10 brake motor.

YZFT series elevator motor model description:

Introduction to the structure of YZFT series elevator motors:

The protection level of the motor casing is drip proof and complies with IP21 regulations.
The cooling method of the electric motor is self fan cooling, which complies with the regulations of IC01.
The structure and installation type of the electric motor are vertical flange installation type (IMV1), and other installation types can also be made according to user requirements.
The YZFT series elevator motor adopts a rolling bearing structure.

Note:

Please pay attention to the model, power, rated voltage, rated frequency, number of poles, and installation structure of the electric motor when placing an order.
For variable frequency elevator motors, it is also necessary to indicate what kind of encoder is installed, whether a thermistor is required, and what kind of thermistor is needed. If there are special requirements for motor power, rated voltage, rated frequency, number of poles, etc., please specify them when placing an order.

YZFT160M Automatic Escalator Three phase Asynchronous Motor Vertical Flange Installation Type (IMV1)