XY(Q) flat three-phase linear induction motorDetailed product description：

Characteristics and Applications of XY (Q) Flat Three phase Linear Induction Motor:

Linear motor is a driving device that directly converts electrical energy into linear motion mechanical energy without any intermediate conversion. In the case of linear motion, the transmission device driven by a linear motor has the following advantages compared to the transmission device driven by a rotary motor:
Due to the direct generation of thrust without the need for any conversion device, the intermediate conversion mechanism can be eliminated, simplifying the entire device and system, improving transmission efficiency, and reducing manufacturing costs. Due to the fact that components and transmission devices are not subject to centrifugal force like rotating motors during operation, the speed of linear operation can be unrestricted.
Due to the fact that linear electromagnetic thrust is directly generated by electrical energy, it is a non-contact motion, which can reduce mechanical losses and make transmission components wear free.
Due to the operation of the electromagnetic thrust driven device, it can avoid the noise of mechanical conversion mechanisms such as steel ropes, racks, and transmission belts, and the operating environment is good.

Due to its simple structure and the fact that the primary iron core can be sealed as a whole after embedding, it can be used in special environments such as humidity, harmful gases, high or low temperatures.
Due to its simple structure and good heat dissipation conditions, in many cases, there is no need to add cooling devices and a higher heat load can be designed, thereby improving the power/volume ratio.
A three-phase linear induction motor is a type of linear motor that uses the principle of an induction motor to directly generate electromagnetic thrust from electrical energy. Therefore, it can be applied to industrial, civilian, military, and various other linear motion scenarios such as rail transit, cranes, elevators, and conveyors. The XY (Q) flat three-phase linear induction motor is our

Main technical performance of XY (Q) flat three-phase linear induction motor
The voltage levels include low voltage levels (such as three-phase 110V, 220V, 380V, etc.) and high voltage levels (such as three-phase 1150V, etc.).

The rated frequency can be 50Hz, or it can be set to be lower or higher than 50Hz according to the actual operating speed requirements. Correspondingly, the driving power source can be the power grid or the frequency converter.

The rated output thrust range is 500N~20000N (to be determined through negotiation).
The insulation level can be F level, H level, or 200 ℃ level. The insulation structure has the ability to adapt to the high carrier frequency voltage output by the frequency converter.
Different installation structures and cooling methods (natural cooling or forced air cooling) can be designed according to actual usage requirements.