JFT-9A Electric vehicle charging timerDetailed product description：

JFT-9A electric vehicle charging timer applicable scope:

Charging timing control for electric bicycles, electric tricycles, mobile phones, and various battery packs; Countdown automatic control for various household appliances, etc.
Working voltage: 110-250V, load capacity: 1000W; power consumption:<1W; timing accuracy: ± seconds per hour; Punctuality time: 1-9 hours; Environmental temperature: -10~40 ℃; Relative temperature: ≤ 90%; Atmospheric pressure: 86-106kPa.

Product Introduction:
The JFT-9A electric vehicle charging timer is a high-tech power timing management product mainly based on an 86R series microcomputer chip, equipped with LED display. It is powered by a high-performance switch power supply, ensuring accurate timing and stable and reliable switch performance; Strong voltage adaptability, working normally from 100V to 250V. The use of this product can completely solve the damage caused by overcharging of electric vehicle battery packs (various types of battery packs), as well as the damage to electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals, the damage to electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals, and the loss of electricity bills caused by long-term idle consumption of high-power chargers that are turned off at regular intervals (the maximum power of the charger is 300W, 3.3 hours per kilowatt hour). Therefore, using this product can extend the service life of the battery pack (compared to charging for more than 10 hours per day) for more than six months and save more than 50% of electricity; It is a green product that saves electricity and energy, and a good helper for families.

Usage:
Insert the timer into the power socket like a regular power plug, and then plug the charger into the timer socket. At this moment, the digital tube lights up. Display '0'; Indicates that the power is not connected. To charge, press and hold the setting button for 2 seconds; The digital tube flashes, then press the setting button to select the time to charge, press once to add one hour, press until 9 and return to 0 for cycling; After selecting the time (such as 4 hours), stop operating for 3 seconds. The decimal point in the digital display lights up, indicating that the circuit is connected and the charging timer starts. Every hour, the number decreases by one until it displays "0"; Indicate the end of charging and half turn off the charger power. When charging, if you need to adjust the charging time, you can long press the setting button for two seconds to make the characters flash and reset the time. To turn off the power, you can set the number to zero and it will be half closed; The button has a lock protection function, and if not pressed for more than two seconds, it will not have any adjustment effect.