dMF Series Explosion proof ValvesDetailed product description：

Model Description of Electromagnets for dMF Series Explosion proof Valves


Technical parameters of dMF series explosion-proof valve electromagnetic coil

model	dMFZ-37-MA	dMFB-37-BT4	d*MF-45
Rated current mA			seven hundred
rated voltage	DC:12V. 24V.48V	B: 48V (input voltage AC: 110V) B: 99V (input voltage AC: 220V)
Rated stroke mm	two point eight	two point eight	one point four
Full stroke mm	six	six
Suction N	≥37	≥37	≥45
Magnetic hysteresis%	-	-	≤2
Current hysteresis%	-	-	≤2
Power W	twenty-two	twenty-two	twenty-two
Enduring nominal oil pressure MPa	ten	ten	ten
Purpose	Used for underground and surface use in mines Explosive and flammable places	Explosive and flammable places on the ground	Proportional control directional valve Pilot stage, proportional pressure Force control valve, used for Explosive and flammable places

Dimensions of Electromagnets for dMF Series Explosion proof Valves

Precautions for use
1. The manual push rod at the end can be used during hydraulic system testing and can automatically reset. (dMFZ-GV45 without manual push rod)
2. Remove the cover, connect the wires to the base, and then tighten it. There is a rubber ring placed at the connection point of the casing, and when the nut is tightened, the socket connection is clamped.
3. Cables that meet explosion-proof requirements must be used