BMF80Q1-120/8 Direct Acting Proportional Flow Control ValveDetailed product description：

Model Description


Technical parameters of electromagnetic coil for BMF80Q1-120/8 direct acting proportional flow control valve

model	BMF80Q1-120/8
Rated current A	zero point six
Rated suction N	≥120
Rated stroke mm	eight
Magnetic hysteresis%	≤3.5
Current hysteresis%	≤3.5
Pressure resistance MPa	twenty-one

Dimensions of Electromagnets for BMF80Q1-120/8 Direct Acting Proportional Flow Control Valve

Precautions for use
1. Exhaust:
To achieve stable control, it is necessary to exhaust the air inside the electromagnet and fill the interior of the electromagnet with oil. When exhausting, slowly loosen the exhaust screw at the end of the electromagnet, taking care to prevent oil from splashing out.
2. Instructions for using the plug:
(1) Remove the hollow screws on the inside of the cover, connect the wires to the base, and then tighten them.
(2) There is a rubber ring placed at the socket connection point, which clamps the socket connection when the nut is tightened.