MF9-YC series valve wet electromagnetic coilDetailed product description：

Model Description


MF9-YC series valve wet electromagnetic coil technical parameters

model		MF*9-22YC		MF*9-37YC	MF*9-90YC
Rated suction N		twenty-two		thirty-seven	ninety
Rated stroke mm		two point eight		two point eight	three point six
The total travel distance shall not be less than mm		six point five		six point five	seven point eight
Rated voltage DC/V		12. 24, 110, 220		12. 24, 110, 220	12. 24, 110, 220
Excitation power "Reference" (w)		thirty-five		thirty-five	forty-six
Enduring nominal oil pressure MPa		ten		ten	ten
Action time on the solenoid valve	Connect to MS	forty-five		forty-five	seventy
	Disconnect ms	twenty		twenty	forty

MF9-YC series valve wet electromagnetic solenoid external dimensions

Precautions for use
The manual push rod at the end of the electromagnet can be used during hydraulic system testing and can automatically reset.
When conducting electrical measurements, a magneto electric DC meter should be used.
3. Instructions for using the plug:
（1）. The plug wiring should remove the hollow fastening screw on the inside of the cover, connect the wire on the base, and then tighten it.
（2）. There is a rubber ring placed outside the socket wire, and when the nut is tightened, the socket wire is clamped.