YZR-Z series three-phase asynchronous motors for lifting and metallurgyDetailed product description：

The YZR-Z series three-phase asynchronous motor for lifting and metallurgy is a specialized product used to drive various types of lifting and metallurgical machinery and other similar equipment. It has a large overload capacity and high mechanical strength. It is particularly suitable for equipment that operates for short or intermittent periods, frequently starts and brakes, experiences overload, and has significant vibration and impact.

The power rating and installation dimensions of the electric motor comply with the recommended standards of IEC72, and are similar and interchangeable with West German DIN42681.

The insulation level of electric motors is divided into two types: F and H. F-grade is suitable for general places where the ambient air temperature does not exceed 40 ℃, while H-grade is suitable for metallurgical places where the ambient air temperature does not exceed 60 ℃. Electric motors with two different insulation levels have the same parameters.

Electric motors have good sealing properties, with a protection level of IP44 for general use and IP54 for metallurgical use.
The YZR-Z series is a wound rotor motor.
The rated frequency of the motor is 50Hz and the rated voltage is 380V.
The YZR-Z series three-phase asynchronous motors for lifting and metallurgy can also be manufactured with a frequency of 60 Hz and voltages of 440V and 380V.