FCRG2-12~252kV dry-type capacitor wall bushingDetailed product description：

FCRG2-12~252kV dry-type capacitor wall bushing is composed of main components such as carrier fluid, capacitor core, outer sheath, umbrella skirt, flange, and end structure. There are measuring terminals on the flange, which can be opened for partial discharge and dielectric loss factor measurement. They should be reliably grounded during normal operation. The two ends of the product are equipment cable clamps.

reference standard
GB/T 4109-1999 "Technical Conditions for High Voltage Bushings"

Product Model
FCRG2 -L－ 1 / 2
F: Organic composite main insulation
R: Capacitive type G: dry, silicone rubber external insulation
2: Design serial number, indicating the second design
-L is a through type current transformer with LRB type. If there is no CT, then there is no - L
Among them: 1: Rated voltage, unit: kV
2: Rated current, unit: A
Product Features
Dry type capacitor insulation, oil-free, gas free, porcelain free
High anti pollution level
maintenance-free
Terms of Use
Environmental temperature: -50 ℃ to+50 ℃
Altitude: The standard design is 1000m. When it exceeds 1000m, it shall be corrected according to GB 311

Main performance indicators of FCRG2-12~252kV dry-type capacitive wall bushing
Rated voltage Ur: 12kV, 24kV, 40.5kV, 72.5kV, 126kV, 252kV
Rated current Ir: ≤ 4000A (larger currents require special customization)
Insulation level: (see table below)
Temperature rise: not exceeding 85K
Electrical testing
60s power frequency withstand, partial discharge test, dielectric loss, capacitance, etc
operation and maintenance
maintenance-free

Ordering Instructions
Rated voltage and rated current are required, if equipped with LRB type current
Transformers also need to provide the number of secondary windings and their performance parameters (such as rated current ratio, winding accuracy level, rated load, etc.);