|
Product name: |
CTF series marine spring cable reel
|
|
specification: |
|

Zoom in on the image |
|
Category: |
wire and cable
-- Cable conduit mesh cover |
|
Price: |
factory price |
|
Brand: |
Shanghai |
|
Place of Origin: |
China |
|
Available Quantity: |
batch |
|
delivery cycle: |
Spot goods (or inquire by telephone) |
|
| |
Shanghai Beiyuan Industry and Trade Co.,Ltd
+86-21-66770508
+86-13371811002 |
91way@163.com
13371811002(Wechat) |
|
|
|
CTF series marine spring cable reelDetailed product description:

The CTF series marine spring cable reel is used to control the winding and unwinding of cables, and is suitable for translational walking and other power supply systems that require automatic cable retraction and loading. Spiral spring driven drum has more reliable performance, smaller volume, flexible installation, and convenient maintenance. The flange of the spring driven drum is made of cold-rolled steel plate, and the outer edge of the flange is reinforced. The core of the scroll is made of metal sheet, and the outer layer is protected by a polyester coating, which can effectively prevent corrosion and rust.
The basic principles for the design of CTF series marine spring cable reels are "horizontal laying" and "vertical laying"
Installation of horizontal laying cable:
1. Can be wired in 1 or 2 directions
2. Drag the cable on a continuous plane or support it off the ground with a spacing of less than 1m.
3. The installation height should not exceed 1m from the cable drag plane to the center of the drum.
4. Not considering cable direction
5. Operating speed: 10 meters per minute to 60 meters per minute
6. The maximum acceleration can reach 0.3 m/s ²
Generally, cold-rolled steel plate material is used. Polyester coating or stainless steel material is optional. The protection level is IP56. This product is suitable for use in marine and outdoor environments. The temperature ranges from 55 ° C to -25 ° C. Main installation types: standard horizontal reciprocating: horizontally installed on mobile equipment, with a height difference of about 1m between the lowest point of the cable and the drum, and needs to be supported off the ground. The spring drum must be installed in a position where the cable can be freely released and rolled up, and there are no obstacles.
Vertical cable installation:
1. The drum is installed at the top
2. The cable appears in a vertical downward direction
3. Operating speed: 10 meters/minute to 40 meters/minute
4. The maximum acceleration can reach 0.3 m/s ²
5. The free hanging cable length L0 is not considered.

Related Products:
Related articles: