60ST-M series AC servo motor-[Quotation-data]--Shanghai Huabang Industrial Business-www.91way.com

Product name：

60ST-M series AC servo motor

specification：

200-600W

Zoom in on the image

Category：

motor products -- Communication servo motor

Price：

factory price

Brand：

Shanghai

Place of Origin：

China

Available Quantity：

batch

delivery cycle：

Spot goods (or inquire by telephone)

Shanghai Beiyuan Industry and Trade Co.,Ltd
+86-21-66770508
+86-139101609058

91way@163.com
13901609058(Wechat)

60ST-M series AC servo motorDetailed product description：

60ST-M series AC servo motor technical data (Servo Motor Specifications):

Specification	60ST-M00630	60ST-M01330	60ST-M01930
Rated Power (w)	two hundred	four hundred	six hundred
Rated Torque (N.m)	zero point six four	one point two seven	one point nine one
Maximum Torque (N.m)	one point nine one	three point eight two	five point seven three
Rated speed (r/min)	three thousand	three thousand	three thousand
Maximum speed (r/min)	three thousand and six hundred	three thousand and six hundred	three thousand and six hundred
Rated Current (A)	one point two seven	two point five	three point seven three
Maximum Current (A)	three point six nine	seven point three three	eleven
Rotor Inertia (kg/cm2)	zero point one seven	zero point three zero	zero point four four
Motor Weight (kg)	one	one point four	one point eight
load inertia	≤ 10 times the inertia of the motor rotor
Speed/Position Detector	Incremental photoelectric encoder; 2500p/rev.
structure	Fully enclosed, self cooling (protection level IP65)
Working voltage AC	Single phase 220V -15% -+10% 50/60Hz (300V)
working method	continuous
insulation class	B
ambient temperature	0-40 ° C (non freezing), storage: -25-70 ° C (non freezing)
Surrounding humidity	Below 80% RH (non condensable), storage: below 90% RH (non condensable)
environmental conditions	Indoor (not directly exposed to sunlight), away from corrosive gases, combustibles, etc
height	Below an altitude of 5000m
vibration	Axial: 24.5m/s2 Radial: 49m/S2

Wiring Diagram:
Motor Line

Plug in chip number	one	two	three	four
content	U Red	V Yellow	W Blue	GND yellow/green

Encoder Line

number

one

two

three

four

five

six

seven

eight

nine

ten

eleven

twelve

thirteen

fourteen

fifteen

content

A+

A-

B+

B-

Z+

Z-

U+

U -

V +

V-

W+

W-

VCC

GND

grounding

Outline drawing of 60ST-M series AC servo motor Figure:

60ST-M series AC servo motor torque characteristics (Pull out Torque speed curve):

Instructions for using brake motor:
1. The body length of the 60 series servo motor with braking function is 55mm longer than that of the standard motor;
2. Before starting the motor, please connect the control wire of the brake to a 24VDC power supply (with a current requirement of 2A). The control wire of the brake does not differentiate between positive and negative.
Precautions for servo motor installation:
1. When installing/disassembling the coupling components onto the motor shaft extension, do not forcefully tap to prevent damage to the encoder on the other end of the motor;
2. Try to achieve optimal concentricity and extend the lifespan of the motor.

60ST-M series AC servo motor（schematic diagram）