Scope of application of CLMD type low-voltage power capacitor
Rated voltage: 0.25~1.05KV
Rated frequency: 50Hz
Number of phases: three-phase or single-phase
Environmental temperature: -25 degrees to+50 degrees
Altitude: not exceeding 2000M
Execution standards: GB12747-91, IEC831

Technical characteristics of CLMD type low-voltage power capacitor
1. Adopting advanced zinc aluminum edge thickened metalized polypropylene film as the dielectric material, the capacitor has good self-healing and capacitance stability.
2. The unique gold spraying process endows capacitors with excellent surge resistance.
3. Specially designed internal fuse protection ensures reliable shutdown of damaged units.
4. The unique impregnation process not only gives capacitors a dry structural characteristic, but also has the advantages of impregnating capacitors.
5. Insulated and non-toxic mineral particle fillers prevent capacitors from the possibility of explosion, combustion, and environmental pollution.

Instructions for Use
Rated capacity: 1~30Kvar
Loss: less than 0.5W/Kvar
Capacitor deviation: 0~+10%
Voltage endurance: 2.15Un between phases, AC10S between phase shells 3KV, AC60S
Allowable overvoltage: 110% rated voltage (system voltage adjustment and fluctuation)
Allowable overcurrent: 130% of rated current
Discharge performance: When a 2Un DC voltage is applied to the capacitor, the residual voltage after disconnecting the power supply for three minutes is below 50V.
Insulation performance: 500V DC between polar shells, greater than 1000M Ώ for 1 minute.
Surge limiting: Use specialized contactors for reactors or switching capacitors.
Product Dimension Drawing

CLMD type low-voltage power capacitor