DZD3 series single piece electromagnetic brakeDetailed product description：

The DZD3 series is a dry single-chip electrified brake. This product has a compact structure, short braking delay time, and high braking torque. The biggest advantage is that it can be installed horizontally or vertically, without being affected by the installation angle, eliminating the impact of axial movement of the motor on the high air gap requirements of the brake. Suitable for situations in mechanical transmission systems that require braking or positioning requirements. Braking and positioning in transmission systems such as precision machinery, printing machinery, packaging machinery, testing equipment, and office machinery.

2. Main Performance Parameters: Main Technical Data

Specifications Data Contents	DZD3-05	DZD3-10	DZD3-20	DZD3-40		DZD3-80	DZD3-160
Matching Y series motor base number Y Motors Model Numbers	seventy-one	eighty	ninety	one hundred	one hundred and twelve	one hundred and thirty-two	one hundred and sixty
Rated power of supporting motor (W) Motors Rated Power	0.25-0.55	0.75-1.1	1.1-1.2	1.5-3	2.2-4	2.2-7.5	4-18.5
Rated braking torque (N.m) Rated Braking Torque	five	ten	twenty	forty		eighty	one hundred and sixty
Rated power P20 ℃ (W) Rated Power	thirteen	sixteen	twenty	thirty-two		forty	forty-five
Maximum working air gap δ max (mm) Maximum Working Air Crach	one point five	one point five	one point eight	one point eight		two point two	two point two
Rated voltage (V DC) Rated Voltage	twenty-four	twenty-four	twenty-four	twenty-four		twenty-four	twenty-four
Maximum working speed (rpm) Maximun Rotational Speed	six thousand	four thousand	three thousand and five hundred	three thousand		three thousand	three thousand

3. Appearance and Installation Dimensions: Overall and Introduction Dimensions

Size model

d

D1

D2

D3

D4

D5

L

L1

L2

L3

L4

b

h

δ

DZD3-05

fourteen point eight

eighty

seventy-two

thirty-five

sixty-four

four point five

thirty-five

four

five

twenty

6-9

five

sixteen point two

one

DZD3-10

nineteen point eight

one hundred and five

ninety-five

forty-two

eighty-five

five point five

forty

five

six

twenty

6-9

six

twenty-two point six

one

DZD3-20

twenty-four point eight

one hundred and thirty

one hundred and eighteen

fifty-two

one hundred and five

five point five

fifty

seven

eight

twenty-five

6-10

eight

twenty-eight point one

one

DZD3-40

twenty-nine point five

one hundred and fifty

one hundred and thirty-seven

sixty-two

one hundred and twenty-five

seven

fifty-five

seven

eight

twenty-five

6-10

eight

thirty-two point eight

one

DZD3-80

thirty-nine point five

one hundred and ninety

one hundred and seventy-five

eighty

one hundred and sixty

nine

fifty-six

six

ten

thirty

6-10

twelve

forty-two point eight

one

DZD3-160

forty-four point five

two hundred and thirty

two hundred and fifteen

one hundred

two hundred

nine

sixty-one

six

ten

thirty-five

6-10

twelve

forty-seven point eight

one

4. Installation: Installation

Installation precautions: Warning
The friction plate and armature surface must be free of oil stains and must be kept clean;
Friction disc and armature surface should be kept clean and free of grease.
Adjust the air gap to the specified value "δ" by adjusting the screw during installation;
The gear sleeve must not have axial displacement.
The gear hub are not allowed to move along axially. 

Installation diagram:
Example for lnstallation
1. Motor end cover
2. Internal stop block
3. Magnetic yoke component
4. Spring
5. Gear sleeve
6. Armature yoke component
7. Adjust the stopper
adjustable baffle
8. Adjusting screw
adjustable screws
9. Wind Leaves