LZZBJW-10 series outdoor current transformerDetailed product description：

The LZZBJW-10 series outdoor current transformer is made of advanced outdoor epoxy resin casting, and has the characteristics of high precision, dynamic and thermal stability, resistance to pollution and moisture, and large surface crawling distance.
The LZZBJW-10 series outdoor current transformer is suitable for current and energy measurement and relay protection in AC lines with rated frequency of 50, 60Hz, rated voltage of 10kV and below for outdoor devices.

2、 Structure Introduction
The primary and secondary coils of the LZZBJW-10 series outdoor current transformer are in a chain structure. The measuring grade iron core is made of ultra microcrystalline alloy, and the protective grade iron core is made of high-quality silicon steel sheets. The secondary wires are evenly wound on the iron core. The primary coil is made of high-quality soft copper strip or glass wire enameled wire.

3、 Applicable conditions (if you want to order a product that is applicable beyond the following scope, please consult with me to determine)
1. Equipment type: outdoor;
2. The altitude of the installation site shall not exceed 3000m;
3. Environmental temperature: -40 to+40 ℃;
4. Pollution level: Level III
5. There is no pollution, corrosive or explosive medium in the atmosphere that seriously affects the insulation performance of transformers.

4、 Technical data of LZZBJW-10 series outdoor current transformer (if you want to order product technical data beyond the following range, please consult with me to determine)
1. The product complies with IEC and GB1208-97 "Current Transformers";
2. Rated insulation level: 12/42/75kV;
3. Rated frequency: 50, 60Hz;
4. Rated secondary current: 1A, 5A;
5. Load power factor: COS φ=0.8 (lag);
6. The product is allowed to operate for a long time at 120% of the rated current;
7. The rated output and dynamic thermal stability current can be found on the product nameplate.