LZZX2-10 series current transformersDetailed product description：

The LZZX2-10 series current transformer is suitable for current and energy measurement and relay protection in AC lines with rated frequency of 50, 60Hz, rated voltage of 10kV and below indoor devices.
The LZZX2-10 series current transformer is a fully enclosed maintenance free product formed by epoxy resin casting.

Structure Introduction
The primary and secondary coils of the current transformer are in a chain structure. The measuring grade iron core is made of ultrafine crystalline alloy, and the protective grade iron core is made of high-quality silicon steel sheets. The secondary wires are evenly wound on the iron core. The primary coil is made of high-quality soft copper strip or glass wire enameled wire.

The applicable range of LZZX2-10 series current transformers (if you want to order a product with an applicable range beyond the following, please consult with me to determine)
1. Equipment type: indoor;
2. The altitude of the installation site shall not exceed 1000m;
3. Environmental temperature: -5 to+40 ℃;
4. There is no pollution, corrosive or explosive medium in the atmosphere that seriously affects the insulation performance of transformers.

Technical data of LZZX2-10 series current transformers (if you want to order products with technical data beyond the following range, please consult with me to determine)
1. The product complies with IEC and GB1208-97 "Current Transformers";
2. Rated insulation level: 12/42/75kV;
3. Rated frequency: 50, 60Hz;
4. Rated secondary current: 1A, 5A;
5. Load power factor: COS φ=0.8 (lag);
6. The product is allowed to operate for a long time at 120% of the rated current;
7. The rated output and dynamic thermal stability current can be found on the product nameplate.