LMZB8-10 series current transformersDetailed product description：

The LMZB8-10 series current transformer is suitable for current and energy measurement and relay protection in AC lines with rated frequency of 50, 60Hz, rated voltage of 10kV and below indoor devices.
This product is a fully enclosed maintenance free product formed by pouring epoxy resin.

Introduction to the Structure of LMZB8-10 Series Current Transformers
This product has a busbar structure with equipotential wires. When installing, connect the equipotential wires to the primary busbar. The metrological grade iron core is made of ultrafine crystalline alloy, and the protective grade iron core is made of high-quality silicon steel sheets rolled. The secondary wires are evenly wound on the iron core.

Scope of application of LMZB8-10 series current transformers (if you want to order a product with a scope beyond the following, please consult with me to determine)
1. Type of backup: indoor;
2. The altitude of the installation location shall not exceed 1000m;
3. Environmental temperature: -5 to+40 ℃;
4. There is no pollution, corrosive or explosive medium in the air that seriously affects the insulation performance of the transformer.

Technical data of LMZB8-10 series current transformers (if you want to order products with technical data beyond the following range, please consult with me to determine)
1. The product complies with IEC and GB1208-97 "Current Transformers";
2. Fixed insulation level: 12/42/75kV;
3. Fixed frequency: 50, 60Hz;
4. Fixed secondary current: 1A, 5A;
5. Power factor: COS φ=0.8 (lag);
6. The product is allowed to operate for a long time at 120% of the rated current;
7. The rated output and dynamic thermal stability current can be found on the product nameplate.