LMZK-10 series current transformersDetailed product description：

The LMZK-10 series current transformer is suitable for indoor devices with rated frequency of 50, 60Hz and rated voltage of 10kV and below. Used for circuit control, protection, etc.

Structure Introduction
The LMZK-10 series current transformer adopts a high-strength PVC shell and a fully cast busbar structure. The transformer is directly clamped onto the cable with three elastic rubber rings that press against the cable and integrate with it.
The iron core of the transformer is made of high-quality silicon steel sheets, and the secondary wires are evenly wound on the iron core.
The transformer has a switchable structure and can be installed without cutting the cable.

Scope of application (if you want to order a product, please consult with me to determine if the scope of application exceeds the following)
1. Equipment type: indoor;
2. The altitude of the installation site shall not exceed 3000m;
3. Environmental temperature: -25 to+40 ℃;
4. Cable outer diameter that can be worn once: φ 22- φ 42mm
5. There is no pollution, corrosive or explosive medium in the atmosphere that seriously affects the insulation performance of transformers.

Technical data of LMZK-10 series current transformer (if you want to order product technical data beyond the following range, please consult with me to determine)
1. The product complies with IEC and GB1208-97 "Current Transformers";
2. Rated frequency: 50, 60Hz;
3. The main technical parameters can be found on the nameplate.