Product Details:
YWZ8 series electric hydraulic block brake
Widely used for deceleration and parking braking of mechanical drive devices in lifting, metallurgy, mining, ports, docks, construction, and other industries.
Its installation dimensions and braking torque parameters comply with the JB/T6046-2006 standard. Match Ed series thrusters
Safe and reliable performance, smooth braking, high operating frequency, and adjustable braking torque.
The main swing hinge point is equipped with self-lubricating bearings, which have high transmission efficiency and long service life, and do not require lubrication during use
The brake pads and brake pads adopt a card insertion type Safe and reliable, easy and fast to replace.
There is no need to adjust the interlocking equal clearance device. During use, always maintain equal clearance between the two sides of the tile block to avoid the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance.
Additional functions can be achieved by adding additional devices:
Release (open) or close (close) limit switches can achieve signal display or interlocking protection of whether the brake is released or closed normally.
The use of a thruster with a descent delay valve can achieve delayed closure of the brake.
Usage conditions and regulations:
Environmental temperature: -25 ℃ to+50 ℃.
Relative humidity: ≤ 90%
Altitude: Complies with GB755-2000 standard.
Power supply: three-phase AC 50Hz.380V (also produced according to user requirements for products that can provide 60Hz or different voltages).
Adaptive work schedule: continuous (S1) and intermittent (S3-60%) work schedule.

YWZ8 series electric hydraulic block brake